Introduction:
The TA2024 operates by generating a high frequency switching signal based on the audio input. This signal is sent through a low-pass filter that recovers an amplified version of the audio input. The frequency of the switching pattern is spread spectrum and typically varies between 100kHz and 1.0MHz, which is well above the 20Hz-20kHz audio band.
One feature of the TA2024 15W Amplifier is that it does not require large multi-pole filters to achieve excellent performance in listening tests, usually a more critical factor than performance measurements.
Applications:
* DVD Players
* Mini/Micro Component Systems
* Automotive Audio
* Computer/PC Multimedia
* Cable Set-Top Products
* Televisions
* BatterPowered Systems
Features:
* Mute and Sleep inputs
* Turn-on & turn-off pop suppression
* Over-current protection
* Over-temperature protection
* bridged outputs
* High efficiency
* high power
Specification:
T-Amp IC Tripath TA2024
Output Power 2 x 15W @ 4ohm, 2 x 10W @ 8ohm
Signal-to-Noise Ratio (SNR) 98dB
Dynamic Range 98dB
IHF-IM Distortion 0.1% @ 1W, 4ohm
THD Distortion
0.03% @ 9W, 4ohm
0.1% @ 11W 4ohm
0.1% @ 6W 8ohm
10% @ 15W 4ohm
10% @ 10W 8ohm
Power Efficiency 81% @ 15W, 4ohm, 90% @ 10W, 8ohm
Input Sensitivity 200mV
Audio IN RCA (Left/Right) x 1
Power socket (5.5mm/2.5mm) x 1
Output
Speaker OUT (Left) x 1 pair (+ / -)
Speaker OUT (Right) x 1 pair (+ / -)
Power Indicator (Red/Orange LED) x 1
Power Supply input: DC 12V~13.2V 2A~4A
Dimensions
(W)90mm x (H)50mm x (D)162mm
Weight: 450g
Color:Silver
NOTES:
The machine is BTL output, that is to negative side of speaker out is not public grounded, the two speakers cable must independent connect, no grounding together. This amp is not recommend for car or bike use, if the DC volts input higher than 14V or we may damage IC.
Package included:
- 1 x SA-36 TA2024 Amplifier ( power supply is not included. )
