CNC 4 Axis Step Motor Driver Board Controller TA8435H
Description
Features:
-
Toshiba TA8435H chip - maximum 2.5A drive current !
Click here to down load TA8435H Data sheet
- 1 - 1/8 microstep setting
-
Chip 555 adapts the SOP( SURFACE MOUNT)
-
In application of the SMT solder-reflow technic.
-
Add the 24V and 5V indication LED light
-
Use the DCDC as the isolation of the front and the end power supplys, in order to protect the parallel ports
-
The manual control connector and the limit connector use the DB15 and DB9 connection port support the relay extension
-
Can extend the 5th axis
Attention:
- Please connect the power supply to the power switch of 12-24 V, 5A
* Also we have suitable power supply for selling, please feel free to contact us if you have any demands !
- The power output of 12 V shall be applied to the radiator fan of 12V.
- The interface of driver shall be connected with 2-phase, 4/6 wires stepper motor within 2A current
- This board can work with both unipolar and bipolarstepper motors
- The spindle motor is controlled by Parallel Interface. The voltage of the spindle motor must comply with the scope of the supply voltage.
- Support most parallel softwares KCAM4, MACH3 etc.
- Power supply: 12V-24V DC, 5A
- Output current: peak value 2.5A per phase (2A recommended)
- Resolution setup: full step, 1/2, 1/4, 1/8
- Dimension: 18(L) x 13(W) x 3.6(H) cm
- Net weight: 375g
- For more information, pls click here to Download User Manual
Package included:
- 1 x 4 Axis Driver Board
- 1 x Cable
- Connector
- 1 x Software CD (Mach3 + English User Manual)
Packaging Details
- Unit Type: piece
Package Weight:1.0kg (2.20lb.)
- Package Size: 25cm x 22cm x 15cm (9.84in x 8.66in x 5.91in)
(bought amounts latest)
No one bought this product
Write comments for CNC 4 Axis Step Motor Driver Board Controller TA8435H
