3 Axis CNC Mill Kit TB6560 Stepping Driver+Stepper Motor*3+power supply

Hot sale ! 3 Axis CNC Mill Kit TB6560 Stepping Driver and NEMA23 Stepper Motor *3 +supply *1

UC051 

 

 

Features of Stepper Driver :

• Toshiba TB6560AHQ chip - High power, maximum 3.5A drive current chipset !

• 1-1/16 microstep setting - Higher accuracy and smoother operation than standard 1, 1/2 step!

• Adjustable 1.5A-3A drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different stepper motors

• Overload, over-current and over-temperature safety - Full protection for your computer and peripheral equipment !

• On board current switching - Power output can be set according to specific user requirement !

• Full closed-type optical isolation to protect the user's computer and equipment

• Relay spindle interface - Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be powered by this output!)

• 4 channel inputs interface- Can be used for XYZ limit and emergency stop !

• Professional design - Two stage signal processing with super anti-jamming !

• Bipolar constant current chopper drive with non-resonant region - Controls motors smoothly through range without creep effect !

• Four control inputs (divided into pairs of knives) - Allows setting of limit and emergency stop !

• Universal architecture - Supports most parallel software MACH3,KCAM4 etc!

 

Attention:

• Please connect the power supply to the power switch of 12-36 V, 8A
• The power output of 12V shall be applied to the radiator fan of 12V
• The interface of driver shall be connected with 2/4 phase, 4/6/8 leads stepper motor within 3A current
• This board can work with both unipolar and bipolar stepper motors
• The spindle motor is controlled by Parallel Interface. The voltage of the spindle motor must comply with the scope of the supply voltage.

 

Specifications of Stepper Driver

 

Electrical properties (ambient temperature Tj = 25 pm)
Input Power	12 - 36V DC power supply
Stepper motor drive current	3A (peak value 3.5A)/axis
Drive type	Double-pole constant flow PWM actuation output
Compatible Stepper motors	2/4 Phase, 4/6/8 leads stepper motors within 3.5A

 

Specification of 57BYGH76-401A Stepper Motor:

 

 

• Step Angle Accuracy: +-5%(full step, no load)
• Resistance Accuracy: +-10%
• Inductance Accuracy: +-20%
• Temperature Rise: 80 Celsius CMax.(ratod current,2 phase on)
• Ambient Temperature: -10Celsius +50Celsius
• Insulation Class: B
• Dielectric Strength: 500V AC for one minute
• Shaft Radial Play: 0.06Max.(450g-load)
• Shaft Axial Play: 0.08Max.(450 9-load)

Package included:

• 1 x 3 Axis TB6560 Stepper Driver
• 3 x Nema 23 57BYGH76-401A Stepper Motor
• 5 x Wire connectors
• 1 x Cable
• 1 x CD software(English Manual & Mach 3)
• 1 x power supply

Packaging Details

Unit Type: piece

Package Weight: 4.0kg (8.82lb.)

Package Size: 30cm x 20cm x 20cm (11.81in x 7.87in x 7.87in)

 

(bought amounts latest)

No one bought this product

Total records, divided into pages. First Prev Next Last

Goods Tag：

add tag

CNC Stepper Motor Flexible Coupling Coupler 6.35x8mm

3 Axis Stepper Driver Controller stepping motor Driver ...