3MHz DDS&Sweep Function Signal Generator UDB1103S Meter

This is a full DDS signal source, the use of DC5V power supply can output sine wave, square wave (1% -99% duty cycle can be adjusted), triangle, and sawtooth waveforms and other functions, the maximum output of up to 10Vpp, frequency from 0.01Hz-3MHz, a resolution of 10mHz, both TTL sync output and 60MHz frequency counter with three kinds of functions in one.
 
UDB1100 series is the original SG1000 series of upgrades to increase the beautiful plastic case, upgrade to the BNC input connector output interface, while increasing the output attenuation switch (-32dB, about 40 times), making this instrument a minimum capacity of 10mV output signal about
 
It’s the ideal equipment of electronic engineer, laboratory, production lines, the teaching and scientific research.

Features:

Signal Output function:
Output waveforms: Sine wave, Square wave, Triangle wave and saw tooth wave
Output amplitude: ≥9Vp-p (signal output, no load)(MAX); ≤10mVp-p (MIN)
Output impedance: 50Ω±10%(signal output)
DC offset: ±2.5V(no load)
Display: LCD1602
Frequency range:  0.01Hz ~ 3MHz
Resolution: 0.01Hz(10MHz)
Frequency Stability: ±1×10－6
Frequency accuracy: ±5×10－6
Sine wave distortion: ≤0.8% (reference frequency is 1kHz)
Triangle linearity: ≥98%  (0.01Hz~10kHz)
Rise and fall time of square wave: ≤100ns
Square Wave Duty range: 1%~99%(digital control mode)

TTL Output  function:
Amplitude: >3Vp-p
Fan Out: >20 TTL loads

COUNTER  function:
Counter Range: 0-4294967295
Frequency Meter Range: 1Hz~60MHz
Input Voltage Range: 0.5Vp-p~20Vp-p

SWEEP  Function:
Frequency range: fM1   to  fM2
Sweep time: 1s~99s
Input voltage range: 0.5Vp-p~20Vp-p

Others  function:
Save and Load Parameter: M0-M9(M0: default load)

Introduction of SG100x(S) series DDS signal generator fine tuning.
1) The frequency need to be adjusted to 1862.63950kHz by the button of “left” and “right”.
(2) The last two bits (50) is frequency fine tuning value (default), the frequency increasing and decreasing along with the fine tuning value which is from 00 to 99.
(3) Press the button “OK” and the setting is finished, the data was saved to flash.

 

Package Included

1 x 3MHz DDS Sweep Function Singal Generator
1 x Signal Output Cable 
1 x DC 5V Power Supply
1 x User's English Manual ( sent by e-mail )

 

 

Shop for wholesale 3MHz DDS&Sweep Function Signal Generator UDB1103S Meter with cheap prices now.
 

(bought amounts latest)

No one bought this product

Total records, divided into pages. First Prev Next Last

Goods Tag：

add tag