5 AXIS CNC Router Complete Kit Stepper Driver Board and Stepper Motor *5 and Power Supply

 5 AXIS CNC Complete Kit Stepper Driver Board and Stepper Motor *5 and Power Supply

sku:UC050  

 

Features:

• Toshiba TB6560AHQ chip - High power, maximum 3.5A drive current chipset !

• 1-1/16 microstep setting - Higher accuracy and smoother operation than standard 1, 1/2 step!

• Adjustable 1.5A-3A drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different stepper motors

• Overload, over-current and over-temperature safety - Full protection for your computer and peripheral equipment !

• On board current switching - Power output can be set according to specific user requirement !

• Full closed-type optical isolation to protect the user's computer and equipment

• Relay spindle interface - Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be powered by this output!)

• 4 channel inputs interface- Can be used for XYZ limit and emergency stop !

• Professional design - Two stage signal processing with super anti-jamming !

• Bipolar constant current chopper drive with non-resonant region - Controls motors smoothly through range without creep effect !

• Four control inputs (divided into pairs of knives) - Allows setting of limit and emergency stop !

• Universal architecture - Supports most parallel software MACH3,KCAM4 etc!

Dip settings:

Current Setting	1	2	Decay Mode Settings	3	4	MicroStep Settings	5	6
100%	ON	ON	FAST	ON	ON	1	ON	ON
75%	ON	OFF	25%	ON	OFF	1/2	ON	OFF
50%	OFF	ON	50%	OFF	ON	1/8	OFF	ON
25%	OFF	OFF	SLOW	OFF	OFF	1/16	OFF	OFF

 

Further Details:

• Power supply DC 12-36V (24V 15A DC power supply included.)

* This driver and the steppers get power from the same unit, they don't require separate power source.

* Voltage Selection:

12-16V DC power supply for Nema 17 stepper motors

16-24V DC power supply for Nema 23 stepper motors

24-36V DC power supply for Nema 34 stepper motors

Important: High voltage will burn up the chips or stepper motors!!!

• The power output of 12V shall be applied to the radiator fan of 12V

• Driver output compatible with 2 or 4 phase, 4,6 or 8 lead stepper motors, 3A max.

• Suitable for unipolar or bipolar stepper motors.

• Voltage regulated spindle speed controlled by parallel interface as function of supply voltage.

 

Specification:

Electrical properties (ambient temperature Tj = 25 Celsius pm):
Input Power	12-36V DC power supply
Stepper motor drive current	1.5A - 3A/phase
Drive type	Double-pole constant flow PWM actuation output
Compatible Stepper motors	2 or 4 phase, 4,6 or 8 lead stepper motors, 3A max.

             

Data Sheet for 57BYGH56-401A Stepper Motor

Model	Step angle	Motor length	Rated current	Phase resistance	Phase inductance	Holding torque		Lead wire	Weight
Single Shaft	°	L (mm)	A	Ω	mH	Oz-in	kgf.cm	No.	kg
57BYGH56-401A	1.8	56	2.8	0.9	2.5	175	12.6	4	0.7

 

This 57BYGH56-401A Stepper Motor is designed according to performance of TB6560AHQ driver board. They are the best match. If customer need other motor, please feel free to check following model data sheet.

 

Package Contents:

• 1 x 5 Axis TB6560 Driver Controller

• 5 x Nema23 57BYGH56-401A Stepper Motor

• 1 x 24V 15A DC power supply

• 1 x DB25 parallel cable 

• CD Software

Packaging Details

Unit Type: piece

Package Weight: 5.5kg (12.13lb.)

Package Size: 45cm x 30cm x 30cm (17.72in x 11.81in x 11.81in)

 

(bought amounts latest)

No one bought this product

Total records, divided into pages. First Prev Next Last

Goods Tag：

add tag

CNC Router SC20UU linear ball bearing 20mm XYZ table

CNC SK25 SH25A 25mm Linear Rail Shaft Support XYZ Table

4 AXIS CNC Router or Mill Complete Kit Stepper Driver B...