Description:
Friendly ARM Mini 6410 SBC (Single-Board Computer) with 533 MHz Samsung S3C6410 ARM11 processor. The is the S3C6410 ARM11 Board ideal for learning about ARM systems.
256M RAM,1GB NF
Specification:
Dimension: 110 x 110 mm
CPU: 533 MHz Samsung S3C6410A ARM1176JZF-S (max freq. 667 MHz)
RAM: 256 MB DDR RAM, 32 bit Bus
Flash: 128 MB / 256 MB / 1GB NAND Flash.
EEPROM: 1024 Byte (I2C)
Ext. Memory: SD-Card socket
Serial Ports: 1x DB9 connector (RS232), total: 4x serial port connectors
IR: Infrared Receiver
USB: 1x USB-A Host, 1x miniUSB Slave-OTG 2.0
Audio Output: 3.5 mm stereo jack
Audio Input: Condenser microphone
Ethernet: RJ-45 10/100M (DM9000)
RTC: Real Time Clock with battery
Beeper: PWM buzzer
Camera: 20 pin Camera interface (2.0 mm)
TV Output: CVBS
LCD Interface
Touch Panel: 4 wire resistive
User Inputs: 8x push buttons and 1x A/D pot
User Outputs: 4x LEDs
Expansion: 40 pin System Bus, 30 pin GPIO, 20 pin SDIO (SD, SPI, I2C), 10 pin Buttons (2.0 mm)
Debug: 10 pin JTAG (2.0 mm)
Power: 5V connector, power switch and LED
Power Supply: regulated 5V (Mini6410: 0.25 A, Mini6410 + 4.3" LCD: 0.5 A)
OS Support
STN Displays:
Monochrome, 4 gray levels, 16 gray levels, 256 colors, 4096 colors
Max: 1024x768
TFT Displays:
Monochrome, 4 gray levels, 16 gray levels, 256 colors, 64k colors, true color
Max: 1024x768
40 pin (2.0 mm) and 41 pin connector for FriendlyARM Displays (4.3" and 7")
Windows CE 6
Linux 2.6
Android
Ubuntu
About Superboot(bios):
Superboot need to be writen to SD card to use.
Superboot support install and run the OS directly,don't need USB line, and it's very fast for installing. Average 1.8M/s
- Linux: 125M,writen only need70 sec
- WindowsCE6: 45M,writen only need 25 sec
- Android: 80M, writen only need 45 sec
- Ubuntu: 800M,copy to SD directly
- UserBin: Bare metal process, or simple single file system image, such as uCos, RT-Thread, etc.; can be programmed to Nand,
you can also specify in the configuration file load address to run directly.
|
compare function
|
friendly
Superboot
|
friendly
U-Boot
|
other open source U-Boot
|
|
easy use menu
|
support
|
support
|
some support,but not perfect
|
|
USB download StepLoader,such as Nboot...
|
support
|
support
|
support
|
|
USB download Linuxcore
|
support
|
support
|
support
|
|
USB download Yaffs2 file system image
|
support
|
support
|
some
support
|
|
USB download UBIFSfile system image( usually for Android )
|
support
|
not
support
|
not
support
|
|
USB download EBOOT.nb0
|
no need to use Eboot,so not support
|
no need to use Eboot,so not support
|
support
|
|
USB download WindowsCE image NK.bin
|
support
|
not support
|
not support
|
|
USB download WindowsCE image NK.nb0
|
no need to use Eboot,so not support
|
support
|
not support
|
|
USB download WindowsCE Startup logo
|
support
(can use bmp directly)
|
not support
|
some sopport
|
|
USB download writing programme
|
support
|
support
|
support
|
|
Linux set up refence seting
|
support
|
support
|
support
|
|
normal SD card (<=2G )
|
support
|
support
|
support
|
|
high speed SD card(FAT32 format)
|
support
|
not support
|
not support
|
|
SD card offline writing StepLoader such as Nboot...
|
support
|
not support
|
not support
|
|
SD card offline writing Linux core
|
support
|
not support
|
not support
|
|
SD card offline writing Yaffs2 image
|
support
|
not support
|
not support
|
|
SD card offline writing UBIFSimage
(usually for Android )
|
support
|
not support
|
not support
|
|
SD card offline writing WindowsCE image NK.bin
|
support
|
not support
|
not support
|
|
SD card offline writing WindowsCE Startup logo
|
support
(can use bmp directly)
|
not support
|
not support
|
|
SD card offline writing bare machine progrramme
|
support
|
not support
|
not support
|
|
SD card offline writing Linux full system
|
support
|
not support
|
not support
|
|
SD card run WindowsCE full system directly
|
support
|
not support
|
not support
|
|
SD card run Ubuntu full system directly
|
support
|
not support
|
not support
|
|
SD card run Android full system directly
|
support
|
not support
|
not support
|
|
SD card run bare machine programme
|
support
|
not support
|
not support
|
|
SD read and write system in high speed
|
support
|
not support
|
not support
|
About SD card writing software:
An empty SD card can't start the board .You need to use a software to write the BIOS into SD card first.And this writen BIOS can't be seen in computer directly.
We provide the software SD-Flasher.exe to make the writing.This software is more powerful than IROM_SD_Fusing_tool.exe
Install WindowsCE system:
In fact , This board come with WindowsCE system.But you can install again:
Step1: copy "images"folder to SD card ; Double clip "images\FriendlyARM.ini" file; Find "OS=Linux", change it to "OS=CE6”, save the change and take out the SD card and put it to the board.
Step2: Set the S2 switch to "SDBOOT" and insert the SD card
Step3: Turn on the board
Step4: wait until the system is successfully writen, About 20 sec.
Step5: Set the S2 switch to "NAND" set up. Restart the system.Everythink is OK.
Install Android system:
Step1: insert SD card to computer. ; Double clip "images\FriendlyARM.ini" file
Step2: Find ""OS=CE6” change to OS=Android, save the change and take out the SD card to the board
Step3: Turn on the board ,wait until the system is successfully writen, About 50 sec.
Step4: Set the S2 switch to "NAND" set up. Restart the system.Everythink is OK
Install Linux system:
Step1: insert SD card to computer.; Double clip "images\FriendlyARM.ini" file;
Step2: Find ""OS=Android” change to OS=Linux, save the change and take out the SD card to the board
Step3: Turn on the board ,wait until the system is successfully writen, About 50 sec.
Step4: Set the S2 switch to "NAND" set up. Restart the system.Everythink is OK.
Install Ubuntu system:
Ubuntu is too large(500MB).So no need to write it to SD card. We can run it directly.
Step1: insert SD card to computer. Double clip "images\FriendlyARM.ini" file.
Step2: Find”OS=Linux”,change it to”OS=Ubuntu”,;find”Action=Install”,change it to”Action=Run”;save change take the SD card to the board.
Step3: turn on and run Ubuntu
Items you will receive:
- mini6410 developement board 1 pcs(1 GB NandFlash)
- Power adjuster (+5 v) 1 pcs
- DB9 serial null modem cable 1 pcs
- crossover network cable 1 pcs
- 4.3" TFT touch screen LCD(with touch pen) 1 pcs
